Numeric LED large format displays


migan - Large Format Numeric LED Display

Large Format Numeric LED Displays are display systems in the 7 segment area with powerful LEDs for high-contrast images. Numbers as well as characters in limited form can be displayed.

Numerical LED display with temperature and humidity indications and integrated signal light, dimensions approx. 65 x 30 cm
Production data display with indication of several status values, dimensions approx. 250 x 150 cm
Temperature and pressure display for outdoor use, dimensions approx. 65 x 30 cm
Double-sided fill level indicator for outdoor use, with numerical display with special characters, dimensions approx. 60 x 20 cm
LED measured value display with litre indication, dimensions approx. 60 x 20 cm
Temperature display stainless steel housing, dimensions approx. 40 x 15 cm
Numerical display on three sides with ceiling mounting, dimensions approx. 60 x 40 cm per side
Number of pieces green LEDs, dimensions approx. 50 x 20 cm
Outdoor measured value display with fixed labeling, dimensions approx. 90 x 35 cm
Control display with indication of production figures in shift operation, dimensions approx. 30 x 45 cm

Your benefits of the migan series

  • A modular system for variable digit displays

    The modular system structure makes your number display variable - we adjust the hardware and software ideally to your requirements and supply you with the suitable number display for your area of application!

  • Suitable for industrial use 24/7 for indoor and outdoor use

    High-quality quality and technology make your display suitable for industrial and permanent use - both indoors and outdoors.

  • Housing and special equipment for customised products

    From special housings to fixed labelling or special equipment for special areas of application - we develop and manufacture your customised display!


Modular system numeric display

Modular, flexibly expandable system

The system is based on a modular bus system that can be configured individually for each application. Numerous additional components are available to expand the range of functions. These are connected to the system via common interfaces such as Profibus, Profinet, Ethernet, AD converters, pulse counters and others.

Programmable LED numerical displays

Programmable control electronics

The integrated control board determines, calculates and logs your data and measured values independently.
The electronics can be programmed in the factory or on site - for example for desired reactions to states and events as well as for display on the display or output on an interface.

Control board Numerical display

Easy data transfer and configurable data processing

We have optimized the data interfaces (fieldbus interfaces) of our system and thus considerably simplified the integration into existing systems for the user.
When it comes to system control, we attach great importance to user-friendly and intuitive operation.

The system can also be easily adapted to existing telegrams that cannot be changed by the customer, since individual commands and values are directly assigned, evaluated and implemented in the system via the data telegram.


LED numerical display for indoor and outdoor use

Variable LED numeric display for indoor or outdoor applications

Depending on the reading distance, we offer you digit displays with different digit heights - from 60 mm to 300 mm digit height, which can be read from up to 120 meters. For indoor or outdoor use, we equip our LED number displays with the appropriate equipment. High-quality LED displays are used for a bright and high-contrast display image

LED numerical displays with high-quality aluminium housing Industry

High quality housing

For use in industrial environments, we equip the LED numerical displays with a high-quality housing - made of powder-coated aluminium and in anthracite as standard.

On request, we also manufacture your housing individually in other colours. The housing sizes are variable and depend on the size and arrangement of the display surfaces.

Multi-page LED numeric display for optimum reading conditions

Customised display size with single or multi-page view

We supply your customised numerical display: the structure of the LED displays is modular in height and width. In addition to the one-sided view, we also manufacture the LED display boards on request multi-sided for optimal readability from different directions.

Various mounting types

microSYST offers different mounting types for every application. As standard, the displays are equipped with mounting devices for wall mounting, ceiling mounting, floor mounting or recessed mounting.

Rigid wall mounting with mounting bracket
Rigid mounting bracket for LED numeric displays
Inclinable wall mounting articulated arm
Articulated arm for LED numeric displays
Ceiling mounting with eyelets
Ceiling mounting with eyelets for LED numeric  displays
Ceiling mounting with brackets
Ceiling mounting with brackets for LED numeric  displays
Stand mounting
Pedestal mounting with floor mounting for LED numerical displays
Mast mounting with mast clamps
Pole mounting with pole clamps for LED numeric displays Outdoor
Mounting frame
Mounting frame for LED numerical displays


LED numeric display for visualising numbers

Visualisation of numbers and codes

  • Representation of numbers and (limited) letters
  • Variable digit height available
LED numeric displays with integrated memory

Storage of values

  • Control board with integrated memory
  • Storage of values in case of power interruption (value is stored and displayed again in case of power supply)
LED numerical displays with intelligent control board for determination, logging and visualisation of data and measured values

Determination, logging and visualisation of data and measured values

  • Integrated control board with independent determination, logging and output of data and measured values
  • Selection of the desired unit (e.g. measured value in cm) for visualisation on the LED display
Loudspeakers for LED displays
Numeric display with speed sensor

Additional components

  • Acoustic and optical signal transmitters
    Signal lamps or loudspeakers for the reproduction of warning tones support the information transfer of the large displays and point out important information or border crossings.

  • Sensors
    With the help of sensors, measured values can be displayed in real time on the LED display (e.g. speed, temperature and humidity, physical pressure, etc.).

  • Real time clock / Timer
    If applications take place in connection with clock times or time measurements, a timer is used.

  • Further peripherals
    Additional components can be connected to the system via various interfaces. For example, light barriers and light scanners can be connected, which are used for moving objects.
    Common interfaces for the connection of additional components:

    - Ethernet, WLAN
    - Serial data input
    - Digital inputs and outputs
    - BCD
    - A-D converter
    - pulse counter

Special equipment

Special equipment Fixed labelling for LED numerical displays

Customised label

The LED displays made by microSYST can be equipped with a customised label. It will be placed on the display and will be designed according to customer’s requirements, e.g. with value units or a company logo.

Special equipment Stainless steel housing for LED numerical displays

Stainless steel housing

Stainless steel housings are used  for applications with special requirements to the surface quality (e.g. food industry, hygienic areas etc.). These housings have a special degree of purity and are extremely weather-proof and corrosion-resistant.

Special equipment for real glass pane for LED numerical displays

Real glass

The advantage of real glass is the heat and weathering resistance. Therefore it is ideally suitable for applications with extrem operating temperatures.

Special equipment vibration protection for LED numerical displays

Vibration protection

For applications with the risk of vibration microSYST offers LED displays with special equipment. Due to dampers and securing devices the display will be mechanically decoupled from vibration and the constant functionality will be ensured.

Special equipment for extreme operating temperatures for LED numerical displays

Equipment for extreme temperature ranges

Application areas with extreme temperature zones place high demands on LED displays. microSYST offers for this purpose special equipment variants, e.g. LED displays with built-in heating elements at a particularly low ambient temperature.

Technical Data

miganmigan Outdoor


Display type

7 segment SMD LED

7 segment single LED

Display colour

red, optional green

red, optional green

Brightness controlautomatically or manually adjustable
Viewsingle or multi-sided

Data input & presentation

Data input

selectable: Ethernet TCP/IP, WLAN,
Profibus-DP, Profinet I/O RT, Modbus TCP, Modbus RTU, Ethernet IP, EtherCAT, CANopen, DeviceNet, InterBus, USB, Serial, A-D Converter, pulse input, binary, BCD
Lines1 ... n lines

Digits |
Displayable characters


1 to 40 digits | 0…9 and A, b, c, d, E, F, G, H, I, J, L, n, o, P, q, r, S, t, u, y, -, ., (, )

A-D Converter: number of digits and display freely scalable

BCD: 1 to 4 / 6 digits; optional 8 / 12 (parallel / multiplex) |  0...9, H, E, L, P, -, Blank

Pulse Counter: 1 to 9 digits | pulse input, pulses per unit of time

Character height |
reading distance
60 mm | 24 m
100 mm | 40 m
150 mm | 60 m
200 mm | 80 m
250 mm | 100 m
100 mm | 40 m
200 mm | 80 m
300 mm | 120 m

Housing & mounting


industrial version, powder coated aluminium

Housing colour

RAL 7016 (anthracite)
other colour on request


articulated arm, angle bracket, hanging with chain or mounting frame

Power supply

Operating voltage

230 VAC / 50 Hz, 110 VAC / 60 Hz or 24 VDC ±20 %
Power consumption

60 mm: approx. 1,6 W / digit
100 mm: approx. 3,5 W / digit
150 mm: approx. 4,6 W / digit
200 mm: approx. 6,9 W / digit
250 mm: approx. 9,5 W / digit
 + 4 W for control electronics

100 mm: approx. 4,8 W / digit
200 mm: approx. 12,9 W / digit
300 mm: approx. 19,3 W / digit
+ 5 W for control electronics


Environmental conditions


IP54 or IP65

Operating temperature

0...+50 °C

standard: -20...+50 °C
optional with heating: -25...+50 °C
Storage temperature

-25...+70 °C

-25...+70 °C


We will be pleased to advise you!

Are you in the middle of the project planning or are you looking for a special product?
Then we are looking forward to hearing from you. Please be so kind as to fill in the request form as far as possible. You will then receive a suitable offer -  without any obligation and free of charge.

If you have any further questions, please feel free to contact us by using our contact form.